Sc8108 Multifunction Network LAN Cable Tester Meter Cat5 Phone RJ45 Rj11 BNC
1. Special in cable installation
2. Network cable tester for rj45
3. Dynamical calibrate length
4. Long standby 50h
Main Functions:
* Check Types 5, 5e and 6 twisted cord network and trouble.
* Check cable sequence
* Use TDR (time domain reflectometer), Measure length and distance, find the trouble location.
* Find the determine open circuit, short circuit, jumper or crossfire.
* Service line test and no external adaptor is required
* Determine continuity and wiring pattern.
Key Features:
A person is enough to complete cable continuity check and cable sequence, the easy way
Indicates pair integrity of the cable
Measure length and pair with or without far-end recognizer
Locates the wiring or connection error
Measure cable length and determine the distance of open circuit and short circuit
Permits you to check wiring error in 5E/6E twisted cord network, coaxial cable and telephone line
Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
Dynamically calibrate cable length and make length measurement as accurate as 97%
Simple and easy use, big LCD screen to display test clear
Portable unit with long battery life (wait-case or standby mode for over 50 hours)
Auto time delay shut off
Comes with 1 far-end passive test jack
Far end recognizer with prompt voice
Single board computer software watchdog design and reliable operating
Self-checking function and automatically compensates any change in battery capacity or ambient temperature
Specifications:
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
Length Measurement of Twin Twisted Cable:
Calibration accuracy: 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)
Unit of Measurement: Display in meter (M) or feet (FT)
Length Calibration: User can set self-calibration factor by a given length cable; The length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error
| Item: |
Specification: |
| Item : |
SC8108 2.6" LCD Network Cable Tester (4 x AA) |
| Model: |
GL-8108 |
| Application: |
STP/UTP twin twisted cable, coaxial cable, telephone line |
| Locating Cable: |
Included 1 far-end passive test jack |
| Display: |
Special 4*16 character big screen LED lattice |
| Scope : |
1-350m (3-1200ft) |
| Working Ambient Temperature: |
-10° C to 60° C |
| LCD: |
4 x 16 characters big LCD screen (valid visual field 61.6 x 25.2 mm) |
| Power Supply: |
4*1.5V Size AA batteries with power consumption 16mA |
| Color : |
Grey |
| Dimensions: |
7.01 in x 3.15 in x 1.57 in (17.8 cm x 8.0 cm x 4.0 cm) |
| Weight: |
672 g |
Audited Supplier 
){kind=link}
){kind=link}